The DA1150 DSPBrik is a 1-Channel, 1.5-Giga-Sample-per-Second, 8-bit, A/D Input Module.

 

 

Building block, scalable architecture to right size the hardware to your applications.
 

High-speed I/O between DSPBriks via edge connectors
 

DSPBrik™ 1.5 GSPS A/D Module DA1150

 
 

Features

  • Precision Time Tagging of sampled data via NMEA-0183 or IRIG-B time code inputs and 1-PPS
  • One 180-pin (input/output) I/O port.
  • 4-1/4" square form factor
  • Powerful .5 or 1-million gate field programmable gate array (FPGA)
  • Up to 15 processing and I/O modules can be placed in a single 3U chassis
 

Description

Rincon Research Corporation's Model DA1150 is a single channel, 1.5 Giga-Sample-per-Second (GSPS) WideBand Input Module for the DSPBrik™ family of products. The DA1150 is capable of digitizing analog input signals up to 2200MHz provided proper bandpass filtering and Nyquist sampling techniques are applied. Precision time tagging of the digitized samples is performed using a supplied IRIG-B or NMEA-0183 time standard and a 1PPS (pulse-per-second) input signal.

 

Specifications

 

General:

 FPGA Size .5 or 1-million gates
 ENOB 7.5 bits
 Power Connector Molex 3-pin Mini-Fit JR
Molex 4-pin 2x2 Mini-Fit JR
 Power 10-13VDC
+5VDC
-5VDC
 

High-Speed Input / Output:

 Edge Connectors 1
 Number of Ports 1 per edge connector
 Speed 200 MHz
 Width 68 pins per port (single ended)
 Style QTH-090
 

Time Tag:

 NMEA-0183 RS-232 input, 3 wire, 2mm header
 IRIG-B .5-10Vpp input range (AGC controlled), MCX connector
 1PPS LVCMOS Level, 50ohm/10kohm input termination, MCX connector