The DG1000 provides the user an FPGA reconfigurable architecture with High Speed Serial I/O capabilities.

 

 

DSPBrik™ 4-Channel Gigabit Ethernet Input/Output Module DG1000

 

Features

  • Two reconfigurable 88-pin I/O ports plus four differential clock pairs
  • 9,13,19,23-thousand slice Xilinx® Virtex™II Pro available (select at time of order)
  • 66MHz 855T PowerPC with Brikhouse Linux available for command, control, and reprogrammability
  • 10/100 Base-T nertwork interface for command, control, and reprogrammability by a remote Linux, Unix®, or Windows® PC host
  • 4-1/4" square form factor (connector edge to connector edge)
 

Description

The Rincon Research Corporation Model DG1000 is a re-configurable FPGA DSPBrik™ platform that provides scalability and expandability through two high-density I/O edge connectors, one high-density I/O mezzanine connector, and four mutli-gigabit-per-second (MGT) serial I/O connectors. The FPGA reconfigurability permits the user to define the serial I/O configuration required for each individual's application from gigabit ethernet to fibre channel or other numerous serial I/O formats.

 

Specifications

 

General:

 FPGA Size 9-,13-,19-,23-thousand slices
 FPGA Clock Edge, MGT, or 25-200MHz programmable PLL
 PowerPC 66-MHz MPC855T, 16MB Flash, 32MB DRAM
 Power Connector Molex 3-pin Mini-Fit JR™
 

High Speed Edge Input/Output:

 Edge Connectors 2 ((1) QTH-090, (1) QSH-090)
 Number of Ports 4 (maximum) per edge connector
 Speed 250+ MHz
 

High Speed Mezzanine Input/Output:

 Vertical Connectors 1 (bottom side)
 Number of Bits 64 data, 8 data strobes, address/ctrl
 Speed 166 MHz (PC2700)
 Capacity up to 2 GBytes*
*with optional SO-DIMM memory card (DG1000MC-2)
 

High Speed Serial Input/Output:

 Vertical Connectors 4 Serial ATA (SATA) style (top side)
 Speed 1.25, 2.5 Gbps*
*other speeds available with special oscillator configurations
 Note: 1000BASE-X and 1000BASE-T interfaces supported with optional dual small-formfactor-pluggable (SFP)card (DG1000SFP-2xx)
 

Physical Properties:

 Dimensions 3-7/8"W X 3-7/8"H X 1-3/4"D (with mezzanine), Edge connectors add 3/16-inch to height and width
 Temperature, Operating 0 to +50C
 Power (Standard Configuration) 10-13VDC, 12VDC Nom.
 

DG1000 Ordering Information:

 Part Number DG1000-ss-pt
 ss (size) 20 (9,280 slices, 88 multipliers)
30 (13,696 slices, 136 multipliers)
40 (19,392 slices, 192 multipliers)
50 (23,616 slices, 232 multipliers)
 p (performance) 5
6
7
 t (temp range, components) C - Commercial temperature range
I - Industrial temperature range
 

DG1000 Optional Accessories:

 DG1000MC Mezzanine Memory Card for DG1000
 DG1000MC-2 Mezzanine Memory Card for DG1000, 2GBytes SO-DIMM memory installed
 DG1000SFP Dual SFP adapter for MGT's
 DG1000SFP-2CU Dual SFP adapter with two 1000BASE-T (RJ45) copper Gigabit Ethernet transceivers
 DG1000SFP-2LX Dual SFP adapter with two 1000BASE-X (single-mode, long haul, 1310nm, Dual LC/PC) fiber optic Gigabit Ethernet transceivers